- BBQ Machines
- Blast Chillers & Shock Freezers
- Healthcare
- Base or Plate Heater
- Wax Base
- High Heat Mobile Plate & Platter Dispensers
- Meal Delivery
- Meal Delivery (Individual)
- Rethermalization Units
- Air Curtain Refrigerator
- Tray Line Starter Station
- Dome Storage Carts
- Dome & Base Storage Carts
- Correctional Tray Delivery Cart
- Open Tray Cart
- Aluminum Tray Delivery Carts
- Enclosed Tray Delivery Carts
- Hot & Cold Transport Carts
- Air Curtain Refrigerator
- Cabinets
- Cabinets Heating & Holding
- Cafeteria & Buffet Serving Lines
- Combis
- Conveyors
- Cook & Hold Ovens
- Dispensing Equipment
- Drop-Ins
- Merchandisers
- Oven Proofer Combos
- Ovens
- Proofers
- Racks
- Steam Tables
- Support Equipment
90 MIN PLUS HOLDING TIME
CABINET STYLE, MOBILE, ADJUSTABLE,
HIGH HEAT SERIES AT-STH-XH (PLATES)
SERIES ATO-STH-XH (PLATTERS)
SERIES AT(O)-STH-XH are heated, cabinet style, mobile plate or platter dispensers. They are fitted with a high wattage, forced air heating system for use when plates or platters need to be brought to a higher temperature than usual.
FRAME AND BODY:
The body and top are of unibody design, constructed of heavy gauge stainless steel panels formed to provide rigidity. The unit is insulated on sides and top and lined with zinc coated steel panels.
DISPENSERS:
The unit is fitted with adjustable drop-in dish dispensers, model AT for round plates (see catalog page D-9 for specifications). Refer to the chart below for the dispenser sizes available with these units.
CAPACITIES:
The capacity of each model AT dispenser is approximately 28 to 36 bowls or 50 to 72 plates. The capacity of each model ATO dispenser is approximately 50 to 72 platters.
HEATING SYSTEM:
The unit is heated by a forced air heating system designed for rapid and even heating. A recessed control panel is fitted with an on-off switch, a neon pilot light and an adjustable thermostat. The system is rated 120 volt, single phase, 1500 Watts; and draws 12.5 Amps. A 4' long, three wire cord set with NEMA 5-15P plug is included.
CASTERS:
The unit is mounted on four 4" diameter heavy duty, double ball bearing swivel casters with non-marking rubber tires.
| PLATE DIA. | MODEL NO. | W | L | H |
| 8-3/8" - 9-1/4" | 2AT6-STH-XH | 20-1/8 | 35-1/8 | 36 |
| 9-3/8" - 10-1/4" | 2AT7-STH-XH | 20-1/8 | 35-1/8 | 36 |
Shipping Wt. 180#
| PLATE DIA. | MODEL NO. | W | L | H |
| 8-3/8" - 9-1/4" | 3AT6-STH-XH | 31-3/8 | 33-1/8 | 36 |
| 9-3/8" - 10-1/4" | 3AT7-STH-XH | 31-3/8 | 33-1/8 | 36 |
Shipping Wt. 230#
OPTIONS- (-B) - 1-Pc. wraparound vinyl bumper
- (-U) - Vinyl wraparound bumper
- (-V) - Vertical corner bumpers
- (-Y4) - Polyurethane 4" casters, set of 4, with ball bearing seals
- (-Y5) - Polyurethane 5" casters, set of 4, with ball bearing seals
- (-WB) - Wheel brake
Downloads | |||
| Filename | Description | Date Added | File Size |
2008 Spec Sheet High Heat Mobile Plate & Platter Dispensers |
06/03/2008 | 254 KB | |
F-3.pdf