Elite 500 Refrigerated Milk Dispensers

FRAME AND BODY:
The frame is constructed of all welded heavy gauge stainless steel. The exterior sides are 18 ga. stainless steel and the top is 16 ga. stainless steel. The interior liner is all welded 22 ga. stainless steel, watertight and fitted with a 1/2" I.P.S. chrome plated bronze drain trap at the bottom. The liner is separated from the top by full perimeter breaker strips. The entire cabinet is insulated with 2-1/2" thick poured-in-place polyurethane. All models are equipped with removable stainless steel sliding insulated covers. The covers are fitted with recessed handles and fit into integral double tracks on the top. Interlocking mechanism is provided to interlock with other Elite units.

REFRIGERATION SYSTEM:
The cabinet is refrigerated to maintain a temperature of 38ﾰF, by means of a self-contained evaporative system composed of a built-in four-wall copper refrigerant coil which is connected to a 120 V., single phase, fan cooled, hermetically sealed condensing unit. The condensing unit is 1/4 HP, 5.3 amp. for all models except R22-M which is 1/3 HP, 7.2 amp. and R13-14-M which is 1/3 HP, 8.1 amp. The system is capillary tube type with temperature control. A dial thermometer is mounted on the side to indicate interior temperature. The condensing unit is housed within the cabinet, with louvered panels provided on three sides for access and air circulation. A 6' long three wire cord set with a NEMA 5-15P plug is provided.

DISPENSING MECHANISM:
The cabinet is fitted with one or more removable self-leveling dispensers, each consisting of an all welded 16 ga. stainless steel frame and a 14 ga. stainless steel pan-type carrier for the product. The frame and carrier are connected by a suspension system consisting of a series of stainless steel coil springs and ball bearing guides designed to keep the carrier level at all times. Adjustment of the dispensing height for varying weights is accomplished by engaging or disengaging individual springs. Models R20-M, R21-M and R22-M include aluminum trays which function as separators for layers of milk.

FEET, CASTERS AND BUMPERS:
Stationary models are mounted on 6" high x 1-1/4" O.D. adjustable stainless steel bullet feet. Mobile models are mounted on 5" diameter extra heavy duty, double ball bearing swivel casters with non-marking rubber tires, and are fitted with vinyl corner bumpers.

• PIZZAZZ POWDER COATING IN LIEU OF STAINLESS STEEL.
• Additional aluminum trays, 10" x 20" or 20" x 20".
• Tubular locking device for the covers.
• Chrome wire racks.
• (-Y4) Polyurethane 4" casters, 2 with brakes.
• (-Y5) Polyurethane 5" casters, 2 with brakes.

Specifications

MODEL #	CAPACITY IN CARTONS*	ALUMINUM TRAYS	L	W	H	SHIP WEIGHT	H.P.	AMPS@ 120V
R20-M	486	6-20x20	42.5	28	31	390	1/4	5.3
R21-M	702	6-20x20 6-10x20	59	28	31	450	1/4	5.3
R22-M	972	12-20x20	69	28	31	500	1/3	7.2
R13-5-M	5-13 x13 Racks	-	49	23	31	400	1/4	5.3
R13-6-M	6-13 x13 Racks	-	35.5	35	31	390	1/4	5.3
R13-10-M	10-13x13 Racks	-	51	35	31	410	1/4	5.3
R13-14-M	14-13x13 Racks	-	66-1/2	35	31	420	1/3	8.1

NOTE: Racks are not included with Models R13-5-M thru R13-14-M.

* Capacity is for standard 1/2 pint flat top cartons 2-1/4" sq., 3-3/8" high. For peak top cartons capacity is approx. 2/3 of that indicated.

** On mobile units add 2-1/2" to cabinet length and width for corner bumpers (standard) For overall height add 6" for standard bullet feet; add 6-1/4" for standard casters.

Downloads
Filename	Description	Date Added	File Size
A-9.pdf	2008 Spec Sheet Elite Refrigerated Milk Dispensers	06/03/2008	346.9 KB